A feature rich and highly versatile extender that simplifies, combines and improves the relationship between HDMI, HDBaseT™ and stereo audio for integrators. It allows local and compact audio amplification from the transmitted source, ARC or local audio input, and can be used centrally, in-line or as a display device for one of the most flexible and powerful applications of HDBaseT™ technology to date.
- Transmits 1080p HD at 60Hz and HD multichannel audio from a single HDMI source up to 70 m/230 ft under recommended conditions
- HDMI Input > HDBaseT™ Output, HDBaseT™ Input > HDBaseT™ / HDMI Output
- Combined HDBaseT™ Transmitter, Receiver, Repeater and Class D audio amplifier - all-in-one
- Discrete wide-band bidirectional IR control and fully addressable serial control of AMP via signal transmitted together within the HDMI signal over a single Cat5e/6cable to control source, display and AMP
- RS-232 Commands (Tx, Rx, Gnd) sent with HD Audio and Video contained within single Cat5e/6
- Centralized RS-232 for firmware updates or third party control with open source integration protocols available for market leading control systems
- 3:1 Audio switching/receiver - Audio from centralized source via HDBaseT™ Transmitter Audio Return Channel (ARC) or Local Audio Input via 3.5mm
- AMP may be used centrally with AV source, In-line close to speakers, wall mounted near data connections or locally at display location
- Fully cascadable up to 7 times to further lengthen transmission and increase your distribution capabilities - 70 m/230 ft to AMP > a further 70 m/230 ft to additional AMP x 7
- HDMI output for direct connection of HD display either in-line to each AMP connected or at the end of the run
- 2.1 stereo audio at 25 W per channel with left/right spring terminal connections for speakers
- RCA Subwoofer output connection
- EDID management and pre-sets via DIP switch
- LED indication for visual power, video signal status, audio source selection - HDBaseT™, Local or ARC
- Fully supports 3D applications (frame sequential - Blu-ray and Interlaced Stereoscopic – Satellite/cable broadcasts)
- Supports 36bit Deep Colour
- HDBaseT™ Transmitter powered by 5 V mains adapter or with the 5 V USB power cable to solve space or power availability problems at source location as well as being more energy efficient as the transmitter is only powered when the source is turned on
- 50 m/164 ft Power-over-HDBaseT Passthrough to PoH enabled display receivers
- HDMI V1.4
- Cable termination follows IEEE-568B standards
- HDCP compliant
- Automatically adjusts feedback, equalization and amplification of signal for easy installation
- Accessory pack including configuration software, remote, IR receiver
- Compact size for flexible integration location