6200 Lumens WXGA 1-chip DLP Solid Shine Laser Projector

The PT-RW620 is a 3500 Lumens WXGA 1-chip DLP solid shine laser projector ideal for intensive usage and long lasting brightness in education, museums, exhibitions and digital signage applications.

• Contrast Ratio: 20000
• Depth: 16.34 in
• Height: 5.39 in
• Lens: Manual zoom (2.0x), manual focus, F 2.0 - 3.4, f 21.5 -43.0 mm
• Power Consumption: 460 W (470 VA) (250 W with LIGHT POWER set to NORMAL, 200 W with LIGHT POWER set to Ecosave1, 178 W with LIGHT POWER set to Ecosave2. 0.5 W with STANDBY MODE set to ECO, 8 W with STANDBY MODE set to NORMAL)
• Resolution: 1,280 x 800 pixels (Input signals that exceed this resolution will be converted to 1,280 x 800 pixels.)
• Screen Size: 1.02 - 7.62 m (40 - 300 inches) diagonally, 16:10 aspect ratio
• Width: 17.91 in
• Lens Type: Manual Focus and Zoom
• Lamp Type: Laser
• Throw Ratio: 1.53-3.09:1
• Installation: Ceiling/floor, front/rear
• Technology: 1-chip DLP LED/ Laser
• Communication Ports: RS232
• Keystone Correction Range: Vertical: +/-40°
• Optical Axis Shift: Vertical: +69%, -46% (manual), Horizontal: +28%, -37% (manual)
• Power Cord Length: 3.0 m (9 ft 10 in)
• Product Weight: 24.25 lbs
• Center-to-corner uniformity: 90%
• Brightness Full: 6200 lumens
• Lamp Life Full: 20000 hours
• Communication Formats: RS232C
• Cabinet materials: Molded plastic
• Scanning Frequency YPBPR (YCBCR): 480i(525i): fH 15.75 kHz; fV 60 Hz, 576i(625i): fH 15.63 kHz; fV 50 Hz, 480p(525p): fH 31.50 kHz; fV 60 Hz, 576p(625p): fH 31.25 kHz; fV 50 Hz, 720(750)/60p: fH 45.00 kHz; fV 60 Hz, 720(750)/50p: fH 37.50 kHz; fV 50 Hz, 1035(1125)/60i: fH 33.75 kHz; fV 60 Hz, 1080(1125)/60i: fH 33.75 kHz; fV 60 Hz, 1080(1125)/50i: fH 28.13 kHz; fV 50 Hz, 1080(1125)/25p: fH 28.13 kHz; fV 25 Hz, 1080(1125)/24p: fH 27.00 kHz; fV 24 Hz, 1080(1125)/24sF: fH 27.00 kHz; fV 48 Hz, 1080(1125)/30p: fH 33.75 kHz; fV 30 Hz, 1080(1125)/60p: fH 67.50 kHz; fV 60 Hz, 1080(1125)/50p: fH 56.25 kHz; fV 50 Hz
• Operating Temperature (Maximum): 113 F
• Operating Temperature (Minimum): 32 F
• Scanning Frequency (Video): fH: 15.75 kHz, fV: 60 Hz [NTSC/NTSC4.43/PAL-M/PAL60]; fH: 15.63 kHz, fV: 50 Hz [PAL/PAL-N/SECAM]
• Terminals SERIAL IN: D-sub 9-pin (female) x 1 for external control (RS-232C compliant)
• AC Voltage (Minimum): 100 Volts
• AC Voltage (Maximum): 240 Volts
• Terminals VIDEO IN: RCA pin x 1, 1.0 Vp-p, 75 ohms
• Terminals HDMI IN: HDMI 19-pin x 1, HDCP compatible, Deep Color compatible; 480p(525p), 576p(625p), 720(750)/60p, 720(750)/50p, 1080(1125)/60i, 1080(1125)/50i, 1080(1125)/25p, 1080(1125)/24p, 1080(1125)/24sF, 1080(1125)/30p, 1080(1125)/60p, 1080(1125)/50p, VGA(640 x 480) - WUXGA(1,920 x 1,200), compatible with non-interlaced signals only, dot clock: 25-162 MHz, audio signal: linear PCM (sampling frequencies: 48 kHz, 44.1 kHz, 32 kHz)
• Terminals AUDIO IN: M3 (L, R) x 1, 0.5 Vrms
• Terminals AUDIO OUT: M3 (L, R) x 1 (monitor out: 0-1.8 Vrms, variable)
• DLP™ chip Panel size: 16.5 mm (0.65 in) diagonal (16:10 aspect ratio)
• DLP™ chip Pixels: 1,024,000 (1,280 x 800) x 1, total of 1,024,000 pixels
• DLP™ chip Display method: DLP™ chip x 1, DLP™ system
• Scanning Frequency (HDMI/DVI-I (Digital)): fH: 27-100 kHz, fv: 24-120 Hz, dot clock: 25-162 MHz
• Scanning Frequency (DVI-I (Analog)/RGB): fH: 15-100 kHz, fv: 24-120 Hz, dot clock: 162 MHz or lower
• Terminals DVI-I IN: DVI-I 29-pin x 1
• Terminals DVI-I IN Digital: DVI 1.0 compliant, HDCP compatible, for single link only; 480p, 576p, 720/60p, 720/50p, 1080/60i, 1080/50i, 1080/24p,1080/24sF, 1080/25p, 1080/30p, 1080/60p, 1080/50p, VGA(640 x 480) - WUXGA(1,920 x 1,200), compatible with non-interlaced signals only, dot clock: 25-162MHz
• Terminals COMPUTER (RGB) IN: D-sub HD 15-pin (female) x 1
• Terminals COMPUTER (RGB) IN R, G, B: R: 0.7 Vp-p, 75 ohms, G: 0.7 Vp-p (G: 1.0 Vp-p for sync on G), 75 ohms, B: 0.7 Vp-p, 75 ohms HD/VD, SYNC: TTL, high impedance, positive/negative automatic NOTE: HD/SYNC, and VD terminals do not accept tri-level sync signals.
• Terminals COMPUTER (RGB) IN Y, PB, PR (Y, CB, CR): Y: 1.0 Vp-p (including sync signal), PB/PR(CB/CR): 0.7 Vp-p, 75 ohms
• Terminals LAN/DIGITAL LINK: RJ-45 x 1 for network and DIGITAL LINK (video/audio/network/serial control) connection, 100Base-TX, compatible with PJLink™, HDCP compatible, Deep Color compatible, 480p(525p), 576p(625p), 720(750)/60p, 720(750)/50p, 1080(1125)/60i, 1080(1125)/50i, 1080(1125)/25p, 1080(1125)/24p, 1080(1125)/24sF, 1080(1125)/30p, 1080(1125)/60p, 1080(1125)/50p, VGA(640 x 480) - WUXGA(1,920 x 1,200), compatible with non-interlaced signals only, dot clock: 25-162 MHz
• Terminals DVI-I IN RGB: R: 0.7 Vp-p, 75 ohms; G: 0.7 Vp-p (G: 1.0 Vp-p for sync on G), 75 ohms; B: 0.7 Vp-p, 75 ohms; HD/VD, SYNC: TTL, high impedance, positive/negative automatic; NOTE: HD/SYNC, and VD terminals do not accept tri-level sync signals.
• Terminals DVI-I In YPBPR (YCBCR): Y: 1.0 Vp-p (including sync signal), PB/PR(CB/CR): 0.7 Vp-p, 75 ohms
• Terminals 3D SYNC OUT: Mini DIN 3-pin x 1, for 3D transmitter connection

• Aspect Ratio - 16:10
• HDBaseT - Yes
• Number of Imagers - 3-chip
• Projector Applications - Corporate
• Projector Applications - Digital Signage
• Projector Applications - Education
• Projector Technology Type - DLP
• Supported Resolution - WXGA (1280x800)