7000 Lumens WXGA 1-chip DLP Fixed Installation Projector

The PT-DW750U 1-Chip DLP Fixed Installation Projector quietest high brightness fixed installation designed for museums, exhibitions and digital signage applications.

• Aspect Ratio - 16:10
• HDBaseT - Yes
• Projector Applications - Corporate
• Projector Applications - Education
• Projector Technology Type - DLP
• Supported Resolution - WXGA (1280x800)

• Operating Temperature (Maximum): 113 F
• Operating Temperature (Minimum): 32 F
• Lamp Life Economy: 6000 hours
• Brightness Full: 7000 lumens
• Communication Formats: RS232C
• Communication Ports: USB, RS232
• Contrast Ratio: 3000
• Lamp Type: 310W UHM
• AC Voltage (Maximum): 240 Volts
• AC Voltage (Minimum): 100 Volts
• Depth: 19.61 in
• Height: 6.89 in
• Width: 19.61 in
• Product Weight: 37.48 lbs
• Regulatory Compliance: HDCP
• DLP™ chip Panel size: 16.5mm (0.65in) diagonal (16:10 aspect ratio)
• DLP™ chip Display method: DLP™ chip x 1, DLP™ system
• DLP™ chip Pixels: 1,024,000 (1,280 x 800) x 1, total of 1,024,000 pixels
• Screen Size: 1.27 - 15.24m (50 - 600 inches) (1.27 - 5.08m (50 - 200 inches) with the ET-DLE055 (16:10 aspect ratio)) (2.54 - 8.89m (100 - 350 inches) with the ET-DLE030 (16:10 aspect ratio))
• Centre-to-corner Uniformity: 90%
• Resolution: 1,280 x 800 pixels (Input signals that exceed this resolution will be converted to 1,280 x 800 pixels.)
• Scanning Frequency (HDMI/DVI-D): fH: 15 - 100kHz, fV: 24 - 120Hz, dot clock: 25 - 162mHz
• Scanning frequency (RGB): fH: 15-100kHz, fV: 24-120Hz, dot clock: 162mHz or lower
• Scanning Frequency YPBPR (YCBCR): 525i(480i): fH 15.75kHz, fV 60Hz, 625i(576i): fH 15.63kHz, fV 50Hz, 525p(480p): fH 31.50kHz, fV 60Hz, 625p(576p): fH 31.25kHz, fV 50Hz, 750(720)/60p: fH 45.00kHz, fV 60Hz, 750(720)/50p: fH 37.50kHz, fV 50Hz, 1125(1035)/60i: fH 33.75kHz, fV 60Hz, 1125(1080)/60i: fH 33.75kHz, fV 60Hz, 1125(1080)/50i: fH 28.13kHz, fV 50Hz, 1125(1080)/25p: fH 28.13kHz, fV 25Hz, 1125(1080)/24p: fH 27.00kHz, fV 24Hz, 1125(1080)/24sF: fH 27.00kHz, fV 48Hz, 1125(1080)/30p: fH 33.75kHz, fV 30Hz, 1125(1080)/60p: fH 67.50kHz, fV 60Hz, 1125(1080)/50p: fH 56.25kHz, fV 50Hz
• Scanning Frequency (Video/Svideo): fH: 15.75kHz, fV: 60Hz [NTSC/NTSC4.43/PAL-M/PAL60], fH: 15.63kHz, fV: 50Hz [PAL/PAL-N/SECAM]
• Optical Axis Shift: Vertical: +60% (powered), Horizontal: +/-10% (powered), NOTE: Optical axis shift function cannot be operated when used with the ET-DLE055. If using the ET-DLE030, the optical axis is fixed.
• Keystone Correction Range: Vertical +/-40° (+/-30° with the ET-DLE055/DLE085/DLE105.) cannot be used when the ET-DLE030 is installed.
• Installation: ceiling/floor, front/rear
• Terminals HDMI IN: HDMI 19-pin x 1, Deep Color, compatible with HDCP, 525i(480i), 625i(576i), 525p(480p), 625p(576p), 750(720)/60p, 750(720)/50p, 1125(1080)/60i, 1125(1080)/50i, 1125(1080)/25p, 1125(1080)/24p, 1125(1080)/24sF, 1125(1080)/30p, 1125(1080)/60p, 1125(1080)/50p, VGA(640 x 480) - WUXGA(1,920 x 1,200), dot clock: 25mHz -162mHz, NOTE: Compatible with non-interlaced signals only.
• Terminals DVI-D IN: DVI-D 24-pin x 1, DVI 1.0 compliant, HDCP compatible, for single link only, 525i(480i), 625i(576i), 525p(480p), 625p(576p), 750(720)/60p, 750(720)/50p, 1125(1080)/60i, 1125(1080)/50i, 1125(1080)/25p, 1125(1080)/24p, 1125(1080)/24sF, 1125(1080)/30p, 1125(1080)/60p, 1125(1080)/50p, VGA(640 x 480) - WUXGA(1,920 x 1,200), dot clock: 25mHz -162mHz, NOTE: Compatible with non-interlaced signals only.
• Terminals RGB 1 IN: BNC x 5
• Terminals RGB 1 IN R, G, B: R: 0.7Vp-p, 75 ohms, G: 0.7Vp-p (G: 1.0Vp-p for sync on G), 75 ohms, B: 0.7Vp-p, 75 ohms, HD, VD/SYNC: TTL, high impedance, positive/negative automatic, NOTE: SYNC/HD and VD terminals do not accept tri-level sync signals.
• Terminals RGB 1 IN Y, PB, PR (Y, CB, CR): Y: 1.0Vp-p (including sync signal), PB/PR (CB/CR): 0.7Vp-p, 75 ohms
• Terminals RGB 1 IN S-Video signal: Y: 1.0Vp-p, C: 0.286Vp-p, 75 ohms
• Terminals RGB 2 IN: D-sub HD 15-pin (female) x 1
• Terminals RGB 2 IN R, G, B: R: 0.7Vp-p, 75 ohms, G: 0.7Vp-p (G: 1.0Vp-p for sync on G), 75 ohms, B: 0.7Vp-p, 75 ohms, HD, VD/SYNC: TTL, high impedance, positive/negative automatic, NOTE: SYNC/HD and VD terminals do not accept tri-level sync signals.
• Terminals RGB 2 IN Y, PB, PR (Y, CB, CR): Y: 1.0Vp-p (including sync signal), PB/PR (CB/CR): 0.7Vp-p, 75 ohms
• Terminals 3D SYNC 1 IN/OUT: BNC x 1, 1.0Vp-p, 75 ohms Input: TTL, high impedance. Output: TTL, maximum 10mA
• Terminals 3D SYNC 2 OUT: BNC x 1, 1.0Vp-p, 75 ohms, TTL, maximum 10mA
• Terminals VIDEO IN: BNC x 1, 1.0Vp-p, 75 ohms
• Terminals SERIAL IN: D-sub 9-pin (female) x 1 for external control (RS-232C compliant)
• Terminals SERIAL OUT: D-sub 9-pin (male) x 1 for link control (RS-232C compliant)
• Terminals Remoter 1 In: M3 jack x 1 for wired remote control
• Terminals Remoter 1 Out: M3 jack x 1 for link control
• Terminals Remoter 2 In: D-sub 9-pin x 1 for external control (parallel)
• Terminals LAN/DIGITAL LINK: RJ-45 x 1 for network and DIGITAL LINK (video/network/serial control) connection, 100Base-TX, compatible with Art-Net, compliant with PJLink™ (class 1), Deep Color, compatible with HDCP, 525i (480i), 625i (576i), 525p (480p), 625p (576p), 750 (720)/60p, 750 (720)/50p, 1125 (1080)/60i, 1125 (1080)/50i, 1125 (1080)/25p, 1125 (1080)/24p, 1125 (1080)/24sF, 1125 (1080)/30p, 125 (1080)/60p, 1125 (1080)/50p, VGA (640 x 480) – WUXGA (1,920 x 1,200), dot clock: 25MHz -162MHz
• Power Cord Length: 3m (9ft 10in)
• Cabinet materials: Molded plastic
• Technology: 1-Chip DLP