Digital Link Switcher

DIGITAL LINK switcher is designed for use with Panasonic video display devices. Two output lines of video, audio and control signals (LAN/serial) can be transmitted over distances of up to 150 meters (in long reach mode) using only a LAN cable (CAT5e or greater STP cable). It can also handle an additional DVI-D output line. In addition to video and RGB signals, HDMI signals can be input. Switching is done using the projector’s wireless remote control or the control buttons of the DIGITAL LINK switcher.

• Rackmountable - Yes
• Supported Resolution - WUXGA (1920x1200)
• Switcher Connector Type - DVI
• Switcher Type - Audio
• Switcher Type - Video
• HDBaseT - Yes
• TX RS-232 - No

• Operating Temperature (Maximum): 104 F
• Operating Temperature (Minimum): 32 F
• AC Voltage (Maximum): 240 Volts
• AC Voltage (Minimum): 100 Volts
• Active Power: 32 Watt
• DC Voltage: 16 Volts
• Depth: 9.84 in
• Height: 1.73 in
• Width: 8.27 in
• Product Weight: 2.87 lbs
• Regulatory Compliance: HDCP
• Scanning Frequency Input HDMI:
  •480i (525i): fH 15.73kHz, fV 59.94Hz
  •576i (625i): fH 15.63kHz, fV 50Hz
  •480p (525p): fH 31.47kHz, fV 59.94Hz
  •576p (625p): fH 31.25kHz, fV 50Hz
  •720 (750)/60p: fH 45.00kHz, fV 60Hz
  •720 (750)/50p: fH 37.50kHz, fV 50Hz
  •1080 (1125)/60i: fH 33.75kHz, fV 60Hz
  •1080 (1125)/50i: fH 28.13kHz, fV 50Hz
  •1080 (1125)/25p: fH 28.13kHz, fV 60Hz
  •1080 (1125)/24p: fH 27.00kHz, fV 50Hz
  •1080 (1125)/24sF: fH 27.00kHz,fV 24Hz
  •1080 (1125)/30p: fH 33.75kHz,fV 48Hz
  •1080 (1125)/60p: fH 67.50kHz, fV 25Hz
  •1080 (1125)/50p: fH 56.25kHz,fV 30Hz
• Scanning Frequency Input YPBPR (YCBCR):
  •480i (525i): fH 15.73kHz, fV 59.94Hz
  •576i (625i): fH 15.63kHz, fV 50Hz
  •480p (525p): fH 31.47kHz, fV 59.94Hz
  •576p (625p): fH 31.25kHz, fV 50Hz
  •720 (750)/60p: fH 45.00kHz, fV 60Hz
  •720 (750)/50p: fH 37.50kHz, fV 50Hz
  •1080 (1125)/60i: fH 33.75kHz, fV 60Hz
  •1080 (1125)/50i: fH 28.13kHz, fV 50Hz
  •1080 (1125)/60p: fH 67.50kHz, fV 60Hz
  •1080 (1125)/50p: fH 56.25kHz, fV 50Hz
  •1080 (1125)/24p: fH 27.00kHz,fV 24Hz
  •1080 (1125)/24sF: fH 27.00kHz, fV 48Hz
  •1080 (1125)/25p: fH 28.13kHz, fV 25Hz
  •1080 (1125)/30p: fH 33.75kHz, fV 30Hz
• Scanning Frequency Output:
  •WUXGA60-CVT-RB (1920x1200): fH 74.04kHz, fV 59.95Hz
  •1080/25p (1920x1080): fH 67.50kHz, fV 60Hz
  •SXGA+60 (1400x1050): fH 65.22kHz, fV 60Hz
  •1366x768/60 (1366x768): fH 47.71kHz, fV 59.79Hz
  •1280x800/60 (1280x800): fH 49.70kHz, fV 59.81Hz
  •XGA60 (1024x768): fH 48.36kHz, fV 60Hz
  •720/50p (1280x720): fH 45.0kHz, fV 60Hz
  •1080/24p (1920x1080): fH 27.0kHz, fV 24Hz
  •1080/30p (1920x1080): fH 33.8kHz, fV 30Hz
  •1080/50p (1920x1080): fH 56.3kHz, fV 50Hz
  •720/60p (1280x720): fH 37.5kHz, fV 50Hz
  •1080/60p (1920x1080): fH 28.1kHz, fV 25Hz
  •Dot clock frequency: 65.0 MHz to 154.0 MHz
  •The supported output signal for the terminal/terminal is same as the terminal. However, output of 3D signal is supported only by the terminal/terminal, and it is not supported by the terminal.
• Terminals VIDEO IN: PIN jack x1, 1.0Vp-p, 75 ohms
• Terminals DVI-D OUT: DVI-D 24-pin x1
• Terminals AUDIO IN: M3 (L, R) stereo mini jackx3, 0.5Vrms, 22k-ohms
• Terminals AUDIO OUT: M3 (L, R) stereo mini jackx1 (monitor out: 0-2.0Vrms, variable), 2.2k-ohms
• Terminals SERIAL IN: 3-pin 3.5mm detachable terminal for external control (RS-232C compliant)
• Terminals Remoter In: D-sub 9-pin (female)x1 for external control (parallel)
• Terminals LAN: RJ-45x1, for network connection, 1 00Base-TX/10Base-T
• Terminals DIGITAL LINK: RJ-45x2, for DIGITAL LINK connection