The CAT5e/6 extender support HDBaseT/HDMI signal with bi-directional IR and RS-232 control. The extender can be extend up to 250ft @ 1080p/60 1080p/24, 1080i, 720p using Key digital KD-CAT6STP1X CAT6/STP cabling. The extender has internal library with 16 default EDID configurations for each input, in addition to native EDID data for any output/display. The extender allows almost unlimited extension of HDBaseT/HDMI, RS-232 and IR signals with daisy chained Tx and Rx units. The shield of CAT6STP must be soldered on both ends to the shield of RJ45 connector used. The CAT5/5e/6 cable has to be terminated according to TIA/EIA-568-B standard.
- HDBaseT/HDMI via single CAT5e/6 cable
- Bi-directional IR and RS-232 control via 3.5mm mono connection on Tx and Rx units
- Internal library with 16 default EDID configurations for each input in addition to native EDID data for any output/display
- Up to 250ft @ 1080p/60 1080p/24, 1080i, 720p using Key digital KD-CAT6STP1X CAT6/STP cabling
- Up to 200ft @ @ 1080p/60, 1080p/24, 1080i, 720p using third-party CAT5e/UTP cabling
- Capability to pass 3D stereoscopic signal formats
- Equalization depending on the length of cabling used
- Up to 12-bit deep color
- EDID and HDCP transparency from display to source
- Fully licensed and compatible with all HDMI and HDCP technologies
- CAT5/5e/6 cable has to be terminated according to TIA/EIA-568-B standard