The DMCO is a output cards for DM-MD8X8 and DM-MD16X16 DigitalMedia™ switchers, providing versatile combinations of DM fiber, (DM), HDMI and analog audio. A complete selection of cards is offered to allow numerous combinations of DigitalMedia, HDMI® and analog audio outputs on a single switcher chassis. The DM-MD8X8 accepts up to two DMCO cards, with up to four outputs per card, for a total of 8 possible outputs. The DM-MD16X16 accepts up to two DMCO cards, with up to eight outputs per card, for a total of 16 possible outputs. Finally, the DM-MD32X32 accepts up to eight DMCO cards, with up to four outputs per card, for a total of 32 possible outputs. DigitalMedia (DM®) outputs are offered in four types - DM Fiber, DM CAT, DM 8G™ fiber and DM 8G+. Each type is available in pairs of two independent outputs, with an additional HDMI output provided in parallel with one of the DM outputs from each pair (excluding DM Fiber, which provides only DM outputs). This HDMI output carries the same audio and video signals as its companion DM output, perfect for feeding a centralized audio processor via HDMI while simultaneously driving a remote display device via DM. Pairs of dedicated HDMI outputs are also available for applications that do not require a long-distance wiring solution. Each dedicated HDMI output is accompanied by a balanced analog stereo audio output, making any 2-channel audio signal available to feed an analog audio mixer, processor or amplifier. DMCO cards for the DM-MD8X8 and DM-MD32X32 are field-installable, allows output configurations to be customized and changed at any time. DMCO cards for the DM-MD16X16 must be installed by a Crestron-authorized technician and new DM-MD16X16 switchers are shipped with the desired DMCO output card(s) installed. To configure a DM switcher complete with input and output cards, cables and other peripherals, please use the DigitalMedia™ switcher configuration tool.